|
What it is
Mr. MOLY Engine Oil Supplement is a colloidal suspension of molybdenum disulfide (MoS2) in a high grade, multi-viscosity engine oil that contains anti-foam agents and corrosion inhibitors. It is NOT an oil modifier. It uses the engine oil to carry the 0.5 micron particles (that's 0.0005 mm diameter) of MoS2 to critical engine components. (Click here) for more info on molybdenum disulfide.
What it does
Mr. MOLY Engine Oil Supplement plates onto engine surfaces providing a protective barrier that will sustain loads in excess of 200,000 psi.
What does this mean to you?
This thin film of Mr. MOLY prevents metal-to-metal contact between moving parts and effectively eliminates wear. The low coefficient of friction of molybdenum disulfide ( MoS2 ) allows the plated metal parts to glide by each other with reduced friction and heat. The plating action of MoS2 ensures that the protection is there even when the oil has drained off. This is particularly important at startup or in the event of oil or coolant failure.
Where to use it
In gasoline and diesel engines.
- Use Mr. MOLY Oil Supplement in the proportion of 5 - 10% of the total oil capacity. Our new can (300 ml) is therefore appropriate for vehicles with 3 L to 6 L oil capacity.
- You chose the brand of oil YOU want to use.
- Mr. MOLY Engine Oil Supplement can be used with any mineral oil (traditional motor oil), synthetic oil or synthetic/mineral blends.
- For best results, add Mr. MOLY Engine Oil Supplement at each oil change, but you do not need to change the oil before adding. Just ensure you do not overfill.
Mr. MOLY Engine Oil Supplement should NOT be used in engines using a wet clutch system (where the engine, transmission and clutch assembly are all lubricated by the same oil system - found on many motorcycles) or on 2 stroke engines.
|
